Machinery and Electrical Product Rules in the EU

Share this article

WhatsAppLinkedIn

Published on

Machinery and electrical product rules in the EU are not one regime. Machines, electrical equipment and personal protective equipment each fall under their own EU rule, with their own start date and their own split of duties. MAAK Advocaten N.V. in Amsterdam helps manufacturers outside the EU find out which rule applies to their product and who carries the duty.

In short

  • Machinery, electrical equipment and personal protective equipment each fall under their own EU regime; work out per product which one applies.
  • The Machinery Regulation applies from 20 January 2027; the Low Voltage Directive and the PPE Regulation already apply.
  • Selling under your own brand or substantially modifying a product can make you the manufacturer and shifts your duties.
  • Have a product law attorney in the Netherlands check your role and the applicable regime before a customer asks.

Part of our overviews of product compliance in the Netherlands, EU product law and sector-specific product rules in the EU.

Which EU rule applies to your machine, electrical device or PPE?

Each product type has its own rule: Regulation (EU) 2023/1230 for machines, Directive 2014/35/EU for electrical equipment within set voltage limits, and Regulation (EU) 2016/425 for personal protective equipment (PPE). You establish the rule per product.

Each rule has its own moment of application and its own division of roles between manufacturer, importer and distributor. One product can be affected by more than one rule, and then each rule has to be checked on its own. This page covers the three rules above. For other industrial products, rules of their own exist.

Whether a product falls inside a rule, and which role you play under it, depends on the product itself and on how it reaches the EU market.

How do the EU rules compare side by side?

Read the row for your product: it shows the rule, who carries the duty, and the point at which your role can change. Three rows are summarised here and link to deeper articles; EMC, ATEX and pressure equipment have directives of their own.

AreaRuleWho carries the dutyTipping pointRead more
MachineryRegulation (EU) 2023/1230 (Machinery Regulation)Manufacturer, authorised representative, importer, distributorApplies from 20 January 2027; own brand or a modification can make you the manufacturerthe new Machinery Regulation
Electrical equipmentDirective 2014/35/EU (Low Voltage Directive)Manufacturer; importer and distributor50 to 1,000 V AC and 75 to 1,500 V DC; own brand or a modification moves the manufacturer rolethe Low Voltage Directive
Personal protective equipmentRegulation (EU) 2016/425 (PPE Regulation)Manufacturer; importer established in the EU; distributorCategory I, II or III; notified body only for II and III; own brand or a modification moves the manufacturer rolerequirements for PPE
Electromagnetic compatibilityDirective 2014/30/EU (EMC)Not covered on this pageNot covered on this pageNone
Explosive atmospheresDirective 2014/34/EU (ATEX)Not covered on this pageNot covered on this pageNone
Pressure equipmentDirective 2014/68/EUNot covered on this pageNot covered on this pageNone

For the route to the market in general, see selling products in the EU and conformity assessment and notified bodies.

When does the Machinery Regulation apply to your machine?

Regulation (EU) 2023/1230 applies from 20 January 2027, and Directive 2006/42/EC is repealed on that date. Member States may not impede the making available of machines placed on the market under the directive before that date.

The Regulation names four roles: manufacturer, authorised representative, importer and distributor. The importer is the one who places a machine from a third country on the Union market. Your role is not fixed by what you call yourself.

  • An importer or distributor is treated as the manufacturer if it sells under its own name or brand, or modifies the machine in a way that may affect conformity.
  • Whoever carries out a substantial modification, including a user or integrator, is treated as the manufacturer. A non-professional user modifying a machine for its own use is not.
  • The manufacturer keeps the technical file and the declaration for at least ten years.

More in the new Machinery Regulation and the Dutch implementing decree.

Important: Your Dutch importer says it will sell your machine under its own brand, or an integrator wants to change it before delivery. Under the Machinery Regulation, either can make that party the manufacturer, with a technical file to keep for at least ten years. Have a Dutch product law lawyer review the contract and the planned change before you agree to either.

What does the Low Voltage Directive cover, and who is responsible?

Directive 2014/35/EU covers electrical equipment with a nominal voltage of 50 to 1,000 V AC or 75 to 1,500 V DC, except what Annex II excludes. The manufacturer is responsible; importers and distributors have duties of their own.

The voltage that counts is that of the equipment itself. Equipment outside these limits is not covered here.

The manufacturer follows internal production control (module A), so no notified body takes part. Only the manufacturer or its authorised representative affixes the CE marking; the importer checks that it is there.

As under the Machinery Regulation, an importer or distributor becomes the manufacturer if it sells under its own name or brand or modifies the equipment in a way that may affect conformity. A private-label company is itself a manufacturer.

The directive does not oblige you to appoint an authorised representative: it says you “may”. Regulation (EU) 2019/1020 (Article 4), however, requires an economic operator established in the Union for these products. See the Low Voltage Directive for the detail.

What does the PPE Regulation require from you?

Regulation (EU) 2016/425 has applied since 21 April 2018. The manufacturer assigns the PPE to category I, II or III (Annex I); a notified body is involved only for categories II and III.

For category I the manufacturer uses internal production control. The importer must be established in the Union and places PPE from a third country on the market. A manufacturer outside the EU is never itself the importer or the authorised representative.

An importer or distributor becomes the manufacturer if it sells under its own name or brand or modifies the PPE in a way that may affect conformity.

A CE marking alone is not enough. The PPE must also come with the documents and instructions the Regulation requires, and with the manufacturer’s name and address. The manufacturer assigns the category on the basis of Annex I; the category determines whether a notified body is involved. More in requirements for PPE.

Not sure which of these rules your product falls under? Send me the product description and your sales route, and I will tell you which questions to answer first. Contact our product law partner in the Netherlands.

Do these rules apply if you are based outside the EU?

Your role depends on who places the product on the EU market. A manufacturer outside the EU is never itself the importer: the importer is established in the Union and brings the product in from a third country.

“Placing on the market” means making a product available in the Union for the first time. Where your Dutch customer places it on the market from a third country, that customer is the importer and takes on the importer’s duties; you remain the manufacturer unless the own-brand or modification rule applies.

I advise letting your customer act as importer, provided the contract states clearly who does what and you supply the data the importer needs. The alternative is to arrange an EU establishment or an authorised representative yourself.

When does an importer or distributor count as the manufacturer?

Under the Machinery Regulation, the Low Voltage Directive and the PPE Regulation: when it sells under its own name or brand, or modifies the product in a way that may affect conformity. It then takes on the manufacturer’s duties under that rule.

If your distributor wants to sell your product under its own brand, I recommend that it takes the manufacturer role itself. You can record in the contract that you remain the manufacturer, but the rules recognise the own brand as the moment the role moves, and a contract does not change the law.

Important: Your distributor wants your product under its own brand, or you supply a machine together with an electrical control or a PPE component. Each rule may treat own brand or a change affecting conformity as the point where the manufacturer role moves. Have a Dutch product law lawyer check who is the manufacturer under each rule before the first order is confirmed.

Where do you start?

Start with what the product is and who places it on the EU market. Only then look at the roles of manufacturer, importer and distributor under the rule that applies.

  1. Identify the product and test it against each rule on its own: a machine, electrical equipment within the voltage limits, or PPE.
  2. Establish who places it on the EU market, who sells it under its own brand and who modifies it.
  3. Note the date that applies: for machines 20 January 2027; the PPE Regulation has applied since 21 April 2018.
  4. Record the roles in your contract with the importer or distributor, together with the documents and data it needs from you.

Technical work such as testing, drawing up the technical file and choosing a notified body stays with your engineers or a technical consultant. The questions of role and contract are legal ones.

Example: a machine with an electrical control and a PPE component

Suppose you build a machine outside the EU and supply it with an electrical control and a PPE component. A Dutch distributor sells the whole package under its own brand and later changes the control before delivery.

A different rule may apply to each part, and that has to be tested per part. For every rule that applies, own brand puts the distributor in the manufacturer role, and so does a modification that may affect conformity. Who ends up carrying which duty therefore differs per part, and your contract should reflect that.

This is a hypothetical example for illustration, not a description of an actual case.

When do you need a Dutch lawyer?

When a customer puts the conformity responsibility on you, when you doubt which rule applies or who the manufacturer is, and when a product is checked or held back.

One conversation beforehand costs less than a product that may not enter the EU market. Bring in a lawyer when a customer puts responsibility for conformity on you, when you are unsure which rule applies or who counts as the manufacturer, and when there is a check or a held shipment.

We advise manufacturers outside the EU and their Dutch importers and distributors on the roles under each rule and on the contracts that record them.

Frequently asked questions

Do these rules apply if I am based outside the EU?

Your role depends on how the product reaches the EU market, wherever you are based. A manufacturer outside the EU is never itself the importer, which must be established in the Union. Your Dutch customer may take that role and will then ask you for the documents it needs.

When does the Machinery Regulation apply?

From 20 January 2027. Directive 2006/42/EC is repealed on that date, and Member States may not impede the making available of machines placed on the market under the directive before then.

My product falls between two rules. Which one applies?

One product can be affected by more than one rule, and then each rule has to be checked on its own. Which duties follow under each rule calls for a legal assessment of your product.

Does my Dutch distributor become the manufacturer?

Yes, if it sells your product under its own name or brand, or modifies it in a way that may affect conformity. Under each of the three rules covered here, it then takes on the manufacturer’s duties.

When should I involve a Dutch lawyer?

When a customer puts responsibility for conformity on you, when it is unclear which rule applies or who is the manufacturer, and when a product is checked or held back.

Legal framework and sources

  • Regulation (EU) 2023/1230 (Machinery Regulation): Articles 10(3), 17, 18, 51(2), 52(1) and 54.
  • Directive 2014/35/EU (Low Voltage Directive), consolidated text of 30 May 2026: Articles 1, 2 point 3, 7, 8(2) and 10 and Annex II.
  • Regulation (EU) 2016/425 (PPE Regulation), consolidated text of 29 May 2026: Articles 10(2), 11(2), 12 and 48(2) and Annex I.
  • Regulation (EU) 2019/1020 (market surveillance and compliance of products), Article 4: named only.
  • Directive 2014/30/EU (electromagnetic compatibility), named only.
  • Directive 2014/34/EU (equipment for potentially explosive atmospheres), named only.
  • Directive 2014/68/EU (pressure equipment), named only.

About the author. Martin Krüger is a lawyer (advocaat) and partner at MAAK Advocaten. He focuses on commercial law and product regulation (CE marking); he drafts agreements for companies, advises on applicable regulations and litigates before the civil courts. · Profile

Do you supply machines, electrical equipment or PPE into the EU and is it unclear which rule applies or who carries the duty? Put your situation to me through our product law partner in the Netherlands, ideally with a product description and your agreement with the importer or distributor. — Martin Krüger

News & Insights
Which topics would you like to receive updates on?
Who are you?
Which industry or sector do you operate in? (Optional)