Published on
ATEX directive compliance starts with you as the manufacturer: you assign the category, follow the conformity route, draw up the EU declaration and mark the product yourself. The plant operator classifies the zones. At MAAK Advocaten in Amsterdam we review that file and the contracts around it before your Dutch importer or customer asks.
In short
- As manufacturer you assign the category, assess conformity, draw up the EU declaration and mark the product (Articles 6, 13, 14 and 16).
- The category decides the route: category 3 needs no notified body, category 1 and some category 2 equipment need EU-type examination (Article 13).
- In the Netherlands instructions must be in Dutch and the declaration in Dutch or English; the plant operator, not you, classifies the zones.
- Have a Dutch product law lawyer review your file and contracts before the first delivery to a new plant operator.
Part of our overview of machinery and electrical product rules in the EU and of EU product law.
Does the ATEX directive apply to your product?
It applies to equipment and protective systems intended for use in potentially explosive atmospheres, to safety devices outside them that are needed for their safe working, and to components, unless an exclusion in Article 1(2) applies (Directive 2014/34/EU, Article 1(1)).
Article 1(2) excludes, among others, medical devices in a medical environment and products where the explosion hazard comes only from explosive or chemically unstable substances. Whether your product is “equipment” depends on the product and its intended use.
“ATEX” is a common name for two regimes. Neither directive binds a company by itself: the Dutch rules that implement them do (English names are our own translations).
| Regime | Directive | Dutch implementation | Who must act |
|---|---|---|---|
| Product | 2014/34/EU | Warenwetbesluit explosieveilig materieel 2016 (Commodities Act Decree on explosion-safe equipment) | manufacturer, representative, importer, distributor |
| Workplace | 1999/92/EC | Arbeidsomstandighedenwet and Arbeidsomstandighedenbesluit, section 2a (Working Conditions Act and Decree) | employer (plant operator) |
Who must do what, and who is your operator in the Union?
You, as manufacturer, design, assess, declare and mark the product; your economic operator in the Union is your importer, an authorised representative with a written mandate, or a fulfilment service provider.
| Role | Main duty | Directive article |
|---|---|---|
| Manufacturer | design, documentation, conformity assessment, declaration, CE and explosion mark; keep papers 10 years | 6, 13, 14, 16 |
| Authorised representative | optional; written mandate; not Article 6(1) or the technical documentation | 7 |
| Importer | only compliant products; checks documents, CE, declaration; Dutch instructions | 8 |
| Distributor | due care; checks CE, declaration, instructions | 9 |
| Importer or distributor selling under own name or brand, or modifying | treated as manufacturer | 10 |
In the Netherlands your duties apply under the Warenwetbesluit (Article 3). The directive only says you may appoint an EU authorised representative in the Netherlands (Article 7(1)). Regulation (EU) 2019/1020 does require an operator established in the Union for these products (Article 4(1) and (5)): for you the importer, an authorised representative with a written mandate or, if there is none of them, a fulfilment service provider (Article 4(1), (2), (5)).
What manufacturers outside the EU most often get wrong is thinking the Dutch partner can arrange the ATEX file for them. That is not possible: the duties of Article 6 lie with you as manufacturer, and the importer checks what you supply. Discuss that role with your Dutch partner in advance and put it on paper. With one Dutch importer, one point of contact is simplest; a separate authorised representative pays off if you supply several importers or webshops directly.
Is a Dutch importer or plant operator asking you for ATEX papers? Put the file and the contract to our product law partner in the Netherlands.
Which category and route apply, and do you need a notified body?
You assign group and category yourself (Article 2, point 9; Annex I), and the category decides the route (Article 13). A notified body is needed on some routes, not on others.
- Category 3: internal production control (Annex VIII); no notified body.
- Category 2, other than electrical equipment and combustion engines: Annex VIII plus sending the technical documentation to a notified body, which keeps it. No certificate, no inspection.
- Category 1, and category 2 electrical equipment and combustion engines: EU-type examination by a notified body (Annex III) plus a second module (Annex IV, V, VI or VII).
- Unit verification (Annex IX) is an alternative; protective systems follow Article 13(2): EU-type examination or unit verification; a component gets a written attestation instead of CE and declaration (Article 13(3)).
So “ATEX certification” does not always mean a notified body certificate. Risk analysis, choice of protection concept and testing are technical work for your engineers, an Ex expert or a test laboratory, not for a lawyer.
What must you mark, keep and supply in the Netherlands?
Mark the product with CE and the explosion mark, keep documentation and declaration for 10 years, put your name and address on it, and supply Dutch instructions and safety information. The EU declaration may be in Dutch or English.
- Affix CE before placing on the market, then (if a notified body is involved in production control) its number, then the explosion mark with group, category and, for group II, G (gases) and/or D (dust) (Article 16).
- Show on every device your name or mark, postal address, type or serial number and year of construction (Article 6(7); Annex II, point 1.0.5).
- Draw up the EU declaration (Annex X), send a copy with each product, and keep it and the technical documentation for 10 years (Articles 6(2), 6(3) and 14).
- Supply instructions, safety information and labelling in Dutch and the declaration in Dutch or English (Warenwetbesluit, Article 3(2) and (3)).
The directive leaves language to the Member State (Article 6(8)): English is not enough for the instructions.
Who classifies the zone, and who chooses the category?
The plant operator, as employer, classifies the zones. You assign group and category and say what the product is intended for (Article 2, point 9). The letters and numbers are the same; the person responsible is not.
The employer divides places into zones 0 to 2 (gas) and 20 to 22 (dust) (Arbeidsomstandighedenbesluit, Article 3.5d(5), applying Directive 1999/92/EC, Article 7). To the extent that its explosion protection document sets no additional requirements, the employer uses the categories below (Arbeidsomstandighedenbesluit, Article 3.5e, under e).
| Zone | Categories the employer uses |
|---|---|
| 0 or 20 | category 1 |
| 1 or 21 | category 1 or 2 |
| 2 or 22 | category 1, 2 or 3 |
The explosion protection document and the check before first use are also the employer’s duties (Arbeidsomstandighedenbesluit, Articles 3.5c and 3.5e, under i). Whether your category fits depends on the zone data the employer gives you, your intended use (Annex II, point 1.0.6) and the contract.
A message that your category does not match the zone often comes in a hurry. My first step is not the technical defence but a row of documents: which group and category are in your EU declaration and on the product, which intended use is in your instructions, and what has the customer told you in writing about the zone? Then I look at what you promised in quotation and terms. Only then do I reply, briefly and factually. A quick technical answer later becomes the yardstick for what you promised.
How does the ATEX directive work in the Netherlands, and who supervises?
For explosion-safe equipment the competent authority is the Minister of Social Affairs and Employment, and officials designated by the minister supervise (Warenwet, Articles 1(1)(d) and 25). Which service does so in practice is not set out in the Act.
Supervisors can require documents, inspect without notice, and prohibit, restrict or recall a product (Regulation 2019/1020, Article 14(4); directive, Articles 35 and 37). The minister can also order administrative coercion (last onder bestuursdwang) and impose a fine (Warenwet, Articles 32 and 32a); see sales ban, seizure or fine from a Dutch regulator.
After an accident at the plant, supervisors can investigate and order work to stop (Arbeidsomstandighedenwet, Articles 24(4) and 28; see workplace inspections in the Netherlands).
What do you do when your customer or a Dutch authority asks for your documents?
Find out who asks, on what basis and by when, then gather your EU declaration and technical documentation. On a reasoned request you must give a competent authority all information and documentation and cooperate (Article 6(10)).
First I look at what exactly is going on. My approach is to repair the file before it becomes a measure, to show the authority what you have put right, and to promise only what you can deliver. When there is an incident at the operator, the questions often reach you through your customer. I then establish which documents exist and what you said when.
When do you need a Dutch lawyer for the ATEX directive?
When there is a counterparty or a risk in the chain: a customer who wants another category or ATEX proof, an authority with a request, a partner with its own brand, or an incident that puts your equipment in view.
| Situation | What is at stake | What we do first |
|---|---|---|
| Customer wants another category or proof | you assigned category and intended use (Article 2, point 9) | read terms and confirmation, draft the reply |
| Authority asks for documents or finds a defect | documents on request (Article 6(10)); recall (Article 38) | read the letter, safeguard the deadline |
| Incident at the operator | questions to you as manufacturer (Article 6(10)) | safeguard documents and correspondence |
| Own brand, or operator builds for own use | treated as manufacturer (Articles 2, point 12, and 10) | establish roles, adapt contract |
I advise having the agreements on category, intended use and responsibility checked before the first delivery to a new plant operator. What you say at the sale decides later who carries a wrong combination with a zone, and afterwards such an agreement is hard to make.
Record for which use and which zone you supply the device, and who provides what. The contract should also cover what happens when your customer modifies the device or sells it under his own brand, and which documents you hand over with each delivery.
Example: a category 3 device and a zone 1 customer
Agree category, intended use and zone data before the first delivery. This hypothetical example shows the gap when nobody did.
Suppose a Canadian manufacturer supplies a Dutch importer, which resells to a plant operator. The manufacturer assigned category 3 and wrote the intended use in the instructions. The operator’s explosion protection document puts the place in zone 1, where the employer uses category 1 or 2 equipment (Arbeidsomstandighedenbesluit, Article 3.5e, under e); the document may add requirements. What each party put on paper before the order can decide later who has to answer for the mismatch.
How does MAAK Advocaten work on ATEX files?
MAAK Advocaten in Amsterdam acts for manufacturers, importers and distributors, and for plant operators on the contractual split with the manufacturer.
We establish your role, check route and file, settle the contract and handle contact with the authority; we do not test or classify zones.
Frequently asked questions
Does the ATEX directive apply to my product, and do I need a notified body?
It applies to equipment, protective systems and components for potentially explosive atmospheres, unless Article 1(2) of the directive excludes them. Category 3 needs no notified body. Category 1, and electrical category 2 equipment and engines, need EU-type examination by one; other category 2 equipment sends its documentation to one (Article 13 of the directive).
Who classifies the zone, and who chooses the category?
The plant operator, as employer, classifies the zones (Arbeidsomstandighedenbesluit, Article 3.5d(5), applying Directive 1999/92/EC, Article 7). You assign group and category (Article 2, point 9, of the directive; Annex I), and the employer uses in each zone the categories the Arbeidsomstandighedenbesluit allows (Article 3.5e, under e).
What does the authority do in the Netherlands if my product is checked?
Officials designated by the Minister of Social Affairs and Employment can request documents, inspect and require corrective action (Regulation 2019/1020, Article 14(4)). A continuing formal non-conformity can lead to restriction or recall (Article 38 of the directive).
When should I call a Dutch lawyer about the ATEX directive?
Have a Dutch product law lawyer review your file and contracts before the first delivery to a new plant operator, and call one when an authority or customer asks for proof.
Legal framework and sources
- Directive 2014/34/EU, in the consolidated version of 30 May 2026, Directive 1999/92/EC and Regulation (EU) 2019/1020
- Warenwetbesluit explosieveilig materieel 2016 and Warenwet
- Arbeidsomstandighedenwet and Arbeidsomstandighedenbesluit, section 2a
About the author. Martin Krüger is a Dutch product compliance attorney (advocaat) and partner at MAAK Advocaten. His areas include CE marking and product regulation. · Profile
Is a Dutch customer or authority asking about your ATEX file? Put your situation to our product law partner in the Netherlands, or contact Martin Krüger.