Published on
Low voltage directive compliance starts with you as the manufacturer, and a Dutch lawyer can check your file before your importer asks for it. Directive 2014/35/EU applies to electrical equipment designed for 50–1 000 V AC or 75–1 500 V DC, apart from Annex II, and your Dutch importer will ask you for the papers. MAAK Advocaten in Amsterdam reviews that file with you.
In short
- The low voltage directive covers electrical equipment within its voltage limits (Article 1); you assess conformity yourself, with no notified body (Article 6(2), Annex III).
- CE marking is affixed by the manufacturer or its authorised representative, not by the importer, who checks it and adds its own name and address.
- A Dutch customer that sells your product under its own name becomes the manufacturer (Article 10); your contract decides who bears the cost and who indemnifies whom.
- Have a Dutch product law lawyer review your file and contracts before you sign a declaration, mandate or supply agreement.
Part of our overview of EU product law.
Does the low voltage directive apply to your electrical product?
The low voltage directive (LVD) applies if your equipment is designed for 50–1 000 V AC or 75–1 500 V DC and is not in Annex II (Directive 2014/35/EU, Article 1). The test is the rated voltage.
Annex II excludes, among others, explosive-atmosphere equipment, electricity meters and domestic plugs and sockets. Outside the voltage limits the directive does not apply; whether other rules do is checked per product.
Other EU acts can apply next to the LVD or instead of it. Radio equipment under the Radio Equipment Directive falls outside the LVD except as that directive provides (Article 1(4) RED). The EMC Directive 2014/30/EU can cover the same appliance for interference, with one declaration for all acts (Article 15(3) LVD). The General Product Safety Regulation applies only where EU law has no specific provision with the same objective (Article 2(1)).
Who must do what: manufacturer, importer or distributor?
The manufacturer designs, assesses, documents, signs and marks. The importer checks all of that before placing the product on the market, and the distributor checks what is visible. Whoever sells under its own name takes over the manufacturer’s duties.
| Role | Main duty | Article |
|---|---|---|
| Manufacturer | assess, document, declare, mark; keep papers 10 years | 6, 15, 17 |
| Authorised representative | optional; design and technical documentation stay with you | 7 |
| Importer | check before placing on the market; add name and address; keep declaration copy 10 years | 8 |
| Distributor | act with due care; check CE marking and documents | 9 |
| Own name or brand | importer or distributor is treated as manufacturer | 10 |
A private-label seller is a manufacturer: whoever has equipment made and sells it under its own name or trade mark is the manufacturer (Article 2, point 3). Only the manufacturer or its authorised representative affixes CE (Article 16 LVD; Article 30(1) of Regulation (EC) No 765/2008). The importer verifies the marking (Article 8(2)).
Do you need an authorised representative or an importer in the EU?
You need an operator established in the Union, but not necessarily an authorised representative. The directive only says you may appoint one (Article 7(1)); Regulation (EU) 2019/1020 requires an operator in the Union for these products.
For a manufacturer outside the Union, that operator, who carries out the tasks of Article 4(3), is the importer or an authorised representative with a written mandate; a fulfilment service provider only counts where neither is established in the Union (Regulation (EU) 2019/1020, Article 4(1) and (2)).
What manufacturers outside the EU most often get wrong is thinking the Dutch importer can arrange the CE marking or the declaration for them. That is not possible: the importer checks, puts its name and address on the product and keeps a copy. With a manufacturer outside the EU selling in the Netherlands, that role often falls to the Dutch importer. I advise you to discuss the importer’s role in advance and put it on paper, so that nobody has to search when an authority’s letter arrives. With one Dutch importer, one point of contact is simplest; a separate authorised representative pays off if you supply several importers or webshops directly (see EU authorised representative in the Netherlands).
Is a Dutch importer asking you for a declaration, documentation or a mandate? Put the file and the contract to our product law partner in the Netherlands.
What can you arrange yourself, and where do you need a test lab or adviser?
Most of the work is technical, and a test lab or adviser does it better than a lawyer. Low voltage directive CE marking needs no notified body: you assess conformity yourself through internal production control (Article 6(2), Annex III).
- Check the voltage limits and Annex II, and assess the risks against Article 3 and Annex I.
- Apply harmonised standards published in the Official Journal, which gives a presumption of conformity (Article 12).
- Draw up the technical documentation (Annex III) and the EU declaration of conformity (Annex IV), and affix CE (Articles 6, 15 and 17).
- Put your name or brand and one postal address on the product or its packaging (Article 6(6)).
The Dutch Warenwetbesluit elektrisch materiaal (the decree that applies the directive to electrical equipment) adds language rules: contact details and safety instructions are at least in Dutch, the declaration and conformity documents at least in Dutch or English (Articles 3 and 5). See also the EU declaration of conformity.
How does the directive work in the Netherlands?
The Dutch decree on electrical equipment (Warenwetbesluit elektrisch materiaal) implements the directive. According to the explanatory note to Staatsblad 2023, 91, the NVWA supervises these products, and customs checks goods entering the Union.
According to the same note, the NVWA chooses on the basis of risk profiles which incoming shipments to check: the CE marking, the documentation and declaration, or samples. Which measure follows depends on the authority’s letter and on your documents.
Authorities can request documents and inspect (Article 14(4) of Regulation 2019/1020). The measures are those of Article 16: corrective action, withdrawal or recall and, in the end, a restriction or prohibition. In the Dutch system the power lies with the Minister, who can order administrative coercion (Article 32 of the Warenwet, the Dutch Commodities Act) or impose a fine (Article 32a); NVWA officials use it by mandate, according to the explanatory note to Staatsblad 2023, 91. For what follows a measure, see our page on a sales ban, seizure or fine from a Dutch regulator.
The decree has applied since 1 July 2016, and Member States had to apply their measures from 20 April 2016 (Article 26(1)). The Commission has proposed amendments to the LVD (COM(2025) 503); this article covers the directive as consolidated on 30 May 2026.
What do you do when your importer or a Dutch authority asks for your documents?
Find out who is asking, on what basis and by when, and gather your declaration and technical documentation. On a reasoned request the manufacturer must provide the documentation that shows conformity (Article 6(9)).
A shipment that does not move costs money every day and puts your customers under pressure. My first step is therefore practical: knowing within a day what is on the table. I want three things from you: your declaration of conformity, the technical documentation or at least the list of standards you rely on, and a photo of the product with the CE marking and your name and address. Then we check whether the equipment falls under the low voltage directive and who in the chain must show what. The legal side we arrange alongside.
When do you need a Dutch lawyer for the low voltage directive?
You need a Dutch lawyer when there is a counterparty: an authority with a request or measure, an importer who does not cooperate, a customer who holds you liable, or a role that changes through a private label.
The technical work, the risk assessment, the standards, the documentation and the declaration itself, a test lab or adviser does better than I do. I recommend having the division of roles and the supply contract checked before the first order: with a trial batch you are already a manufacturer with all the duties of that role, and an agreement on documentation and indemnity is hard to settle once the goods have been delivered.
| Situation | What is at stake | What we do first |
|---|---|---|
| Shipment held, or the NVWA asks for documents | your documents on request (Article 6(9)); importer’s checks (Article 8(2)); measures (Article 16 Regulation 2019/1020) | read the letter and its basis, order the documents, safeguard the reply |
| A Dutch customer wants its own brand | treated as manufacturer (Article 10) | establish the roles, adapt contract and declaration |
| Your declaration or documentation is wrong | formal non-conformity (Article 22(1)); Warenwet Articles 32, 32a | review the contract, agree documents and indemnity, handle the correspondence with your importer and the authority |
| No point of contact in the Union | operator in the Union required (Article 4(1), (3) Regulation 2019/1020) | draft the importer agreement or mandate (Article 7 LVD) |
Example: a Turkish kettle maker and a Dutch retailer
Agree documents and roles before the first delivery. This hypothetical example shows how a retailer’s own brand changes the picture.
Suppose a Turkish manufacturer makes 230 V kettles and a Dutch retailer wants its own brand on them. Under Article 10 the retailer then becomes the manufacturer, with its own assessment, documentation and declaration. If it keeps your brand and imports the kettles itself, it is the importer and you remain the manufacturer who signs; if it buys from another importer, it is a distributor. Documents, declaration language and the cost of a held shipment must be agreed first.
Hypothetical example, not a case from our practice.
How does MAAK Advocaten work on these files?
MAAK Advocaten N.V. is a law firm in Amsterdam. On a low voltage directive file we first read the letter or contract, establish each party’s role and note the deadline.
Frequently asked questions
Does the low voltage directive apply to my product, or does another regime?
Yes, the low voltage directive applies if your product is designed for 50–1 000 V AC or 75–1 500 V DC and is not in Annex II (Article 1). Radio equipment and general product safety follow other acts.
Do I need an authorised representative in the EU?
You need an operator established in the Union, but not necessarily an authorised representative (Article 7(1): “may”). Regulation (EU) 2019/1020 requires, for a manufacturer outside the Union, an importer or an authorised representative with a written mandate (Article 4).
What does the regulator do in the Netherlands if my product is checked?
According to the explanatory note to Staatsblad 2023, 91, the NVWA supervises these products and selects shipments on risk profiles and checks CE marking, documents or samples. Corrective action, withdrawal or recall are measures under Article 16 of Regulation (EU) 2019/1020; the Dutch power lies with the Minister.
When should I call a Dutch lawyer about the low voltage directive?
You should call a Dutch lawyer about the low voltage directive when an authority sends a request or announces a measure, when an importer or customer wants a contract on documents, indemnity or private label, or when your declaration proves incomplete.
Legal framework and sources
- Directive 2014/35/EU, OJ L 96, 29.3.2014, p. 357
- Regulation (EU) 2019/1020 (Articles 4, 14, 16) and Regulation (EC) No 765/2008 (Article 30)
- Directives 2014/53/EU and 2014/30/EU; Regulation (EU) 2023/988
- Warenwetbesluit elektrisch materiaal and Warenwet
- Staatsblad 2023, 91, explanatory note
- Proposal COM(2025) 503
About the author. Martin Krüger is a Dutch product compliance attorney (advocaat) and partner at MAAK Advocaten. His areas include CE marking and product regulation. · Profile
Is a Dutch importer or authority asking about your low voltage directive file? Put your situation to our product law partner in the Netherlands, or contact Martin Krüger.