Published on
EMC directive compliance starts with you as the manufacturer: you assess the product, draw up the EU declaration of conformity and affix CE yourself, and your Dutch importer will want the papers. Directive 2014/30/EU applies without any voltage limit. At MAAK Advocaten in Amsterdam we review that file and the contracts around it before a Dutch importer or authority asks for it.
In short
- It covers apparatus and fixed installations at any voltage (Articles 2 and 3); you assess conformity yourself, and no notified body is required (Article 14).
- Only the manufacturer or its authorised representative affixes CE; the importer checks the marking and adds its own name and address.
- An importer or distributor that sells your product under its own name or brand is treated as the manufacturer (Article 11); your contract decides who provides which documents.
- In the Netherlands the Rijksinspectie Digitale Infrastructuur supervises, not the NVWA; have a Dutch product law lawyer review your file and contracts before the first delivery.
Part of our overview of EU product law.
Does the EMC directive apply to your product?
It applies to any apparatus or fixed installation, at any voltage, unless an exclusion in Article 2(2) covers it. The test is whether the product can cause electromagnetic disturbance or be affected by it (Directive 2014/30/EU, Articles 2 and 3).
The exclusions cover equipment covered by the Radio Equipment Directive (RED; Article 2(2)(a), read with Article 50 RED), aviation equipment within Regulation (EU) 2018/1139 that is intended exclusively for airborne use, radio amateur equipment unless it is made available on the market, equipment that by its nature cannot cause interference and is immune to it, and custom built evaluation kits for professionals at research and development facilities.
An electrical appliance can fall under the low voltage directive and the EMC directive at once, with one EU declaration of conformity (Articles 2(4) and 15(3)).
An apparatus made only for one particular fixed installation and not otherwise made available on the market needs no CE marking and no declaration, but must come with documentation on the installation and its EMC characteristics (Article 19).
Who must do what: manufacturer, importer, distributor or authorised representative?
The manufacturer designs, assesses, documents, signs and marks. The importer checks all of that before placing the product on the market, and the distributor checks what is visible. Whoever sells under its own name or brand takes over the manufacturer’s duties.
| Role | Main duty | Article |
|---|---|---|
| Manufacturer | design to Annex I, assess, document, declare, mark; keep papers 10 years | 7, 14, 15, 16 |
| Authorised representative | optional; written mandate; design duty and drawing up the technical documentation stay with you | 8 |
| Importer | checks before placing on the market; adds name and address; keeps declaration copy | 9 |
| Distributor | acts with due care; checks CE marking and documents | 10 |
| Own name or brand, or a change that may affect compliance | importer or distributor is treated as manufacturer | 11 |
Only the manufacturer or its authorised representative affixes CE (Article 16; Article 30(1) of Regulation (EC) No 765/2008); the importer verifies that the marking is there (Article 9(2)).
Do you need an authorised representative or an importer in the EU?
You need an economic operator established in the Union, but not necessarily an authorised representative. The EMC directive only says you may appoint one (Article 8(1)); Regulation (EU) 2019/1020 requires an operator in the Union for these products.
For a manufacturer outside the Union that operator is the importer or an authorised representative with a written mandate; a fulfilment service provider counts only where neither is established in the Union (Article 4(2)). A mandate cannot cover the design duty or drawing up the technical documentation (Article 8(1)); it must at least allow the representative to keep the declaration and documentation at the authorities’ disposal (Article 8(2)).
What manufacturers outside the EU most often get wrong is thinking the Dutch importer can arrange the CE marking or the declaration for them. That is not possible: the importer checks those documents and keeps a copy, but you take the responsibility. I advise you to discuss the importer’s role in advance and put it on paper, so that nobody has to search when a letter from the authority arrives. With one Dutch importer, one point of contact is simplest; a separate authorised representative pays off if you supply several importers or webshops directly (see EU authorised representative in the Netherlands).
Is a Dutch importer asking you for a declaration, documentation or a mandate? Put the file and the contract to our product law partner in the Netherlands.
What can you arrange yourself, and where do you need a test lab or adviser?
Most of the work is technical, and a test lab does it better than a lawyer. EMC compliance needs no notified body: you choose between internal production control and, voluntarily, EU-type examination (Article 14).
- Check that the product is apparatus and that no Article 2(2) exclusion applies; design and make it to Annex I.
- Choose the route: internal production control (Annex II), or EU-type examination by a notified body followed by conformity to type (Annex III).
- Draw up the technical documentation and the EU declaration and affix CE (Articles 7(2), 15 and 16); keep both for 10 years (Article 7(3)).
- Put your name or brand and a postal address with one point of contact on the product or, if that is not possible, on its packaging or in an accompanying document (Article 7(6)).
The Dutch Telecommunicatiewet (Telecommunications Act, our own translation) sets the language: Dutch or English is enough for the declaration, the instructions and the safety information (Article 10.2(2)). See also the EU declaration of conformity.
How does the EMC directive work in the Netherlands?
The Netherlands applies the directive through chapter 10 of the Telecommunicatiewet, the Besluit elektromagnetische compatibiliteit 2016 (the EMC Decree, our own short name) and the Regeling elektromagnetische compatibiliteit 2016. The Minister is the competent authority; the Rijksinspectie Digitale Infrastructuur supervises, not the NVWA.
The power lies with the Minister of Economic Affairs and Climate (Telecommunicatiewet, Articles 1.1 and 10.2(1)); supervising officials are inspectors of the Rijksinspectie Digitale Infrastructuur (RDI; roughly “Dutch inspectorate for digital infrastructure”, our own translation), see the Besluit aanwijzing toezichthouders Telecommunicatiewet (Article 2(1)).
The authority can request documents and inspect (Article 14(4) of Regulation 2019/1020). If apparatus does not comply, it requires corrective action within a reasonable period and can restrict or prohibit the product (EMC Decree, Article 18); administrative coercion and a fine can follow (Telecommunicatiewet, Articles 15.2 and 15.4). See our page on a sales ban, seizure or fine from a Dutch regulator.
What do you do when your importer or a Dutch authority asks for your documents?
Find out who is asking, on what basis and by when, and gather your declaration and technical documentation. The manufacturer must give the authority, on a reasoned request, all information and documentation needed to show conformity, and cooperate on risk measures (Article 7(9)).
A letter from an authority causes unease, and you rightly want to know where you stand quickly. My first step is practical: reading what exactly is asked and on what basis, and putting the deadline from the letter in the diary. Then I gather the declaration, the technical documentation, the details of manufacturer and importer, and the instructions. I send what is asked, in order and with a short covering letter, and say what still follows. The legal side, including what the authority may ask, we arrange alongside.
When do you need a Dutch lawyer for the EMC directive?
You need a Dutch lawyer when there is a counterparty: an authority with a request or measure, a customer who reports interference or holds you liable, a supplier or customer who does not cooperate, or a role that changes through a private label.
I advise having the roles and the supply contract checked before the first delivery to a new customer: whoever sells under its own name or brand is a manufacturer with all the duties of that role, and an agreement on documentation and indemnity is hard to make once the product has been delivered.
Record which documents you hand over with every delivery and who keeps what. The contract should also cover what happens when your customer sells under its own brand or changes the product, and who acts when the authority asks for documents.
| Situation | What is at stake | What we do first |
|---|---|---|
| The authority asks for documents | information on a reasoned request (Article 7(9)); where a risk is found, corrective action or recall (Article 38(1)) | read the letter, safeguard the deadline, draft the reply |
| Declaration, CE marking or file not in order | formal non-conformity (Article 40) | assess the file, draft a repair plan |
| A measure follows | coercion order or fine (Telecommunicatiewet, Articles 15.2, 15.4) | prepare the response |
| A customer reports interference or wants an indemnity | you remain responsible for conformity (Article 15(4)); damage and indemnity are for the contract to settle | review the contract; draft documentation duty and indemnity per file |
| A customer wants its own brand | an importer or distributor is treated as manufacturer (Article 11) | establish the roles, adapt contract and declaration |
Example: a Turkish controller maker and a Dutch customer
Agree documents and roles before the first delivery. This hypothetical example shows what happens to the roles when a customer puts its own brand on the product.
Suppose a Turkish manufacturer sells wired controllers, assessed as apparatus under the EMC directive, to a Dutch customer that imports and resells them. The customer wants its own brand on the units and later reports interference at one of its clients. Under Article 11 it is then the manufacturer of the branded units; if it keeps your brand it is the importer and you remain the manufacturer who signs. If none of this was agreed before the first delivery, who supplies the documents and who bears the cost is settled afterwards.
How does MAAK Advocaten work on these files?
MAAK Advocaten in Amsterdam acts for manufacturers, importers and distributors. On an EMC directive file we first read the letter or contract, establish each party’s role and note the deadline.
Frequently asked questions
Does the EMC directive apply to my product, or does another regime?
It applies to apparatus and fixed installations at any voltage, unless Article 2(2) excludes them. Equipment covered by the RED falls outside it; the low voltage directive can apply to the same appliance.
Do I need an authorised representative in the EU?
Not necessarily: the directive says you may appoint one (Article 8(1)). Regulation (EU) 2019/1020 (Article 4) does require an operator established in the Union: the importer or an authorised representative with a written mandate or, if neither is established there, a fulfilment service provider.
What does the authority do in the Netherlands if my product is checked?
The Minister of Economic Affairs and Climate is the competent authority; officials of the Rijksinspectie Digitale Infrastructuur supervise, not the NVWA. They can request documents and require corrective action.
When should I call a Dutch lawyer about the EMC directive?
Have a Dutch product law lawyer review your file and contracts before the first delivery to a new customer, and call one when an authority sends a request or announces a measure, when a customer reports interference or wants an indemnity or private label.
Legal framework and sources
- Directive 2014/30/EU, in the consolidated version of 30 May 2026
- Regulation (EU) 2019/1020, Regulation (EC) No 765/2008 and Regulation (EU) 2018/1139
- Directive 2014/53/EU (RED); Directive 2014/35/EU (low voltage directive)
- Telecommunicatiewet, Besluit elektromagnetische compatibiliteit 2016, Regeling elektromagnetische compatibiliteit 2016 and Besluit aanwijzing toezichthouders Telecommunicatiewet
About the author. Martin Krüger is a Dutch product compliance attorney (advocaat) and partner at MAAK Advocaten. His areas include CE marking and product regulation. · Profile
Is a Dutch importer or authority asking about your EMC directive file? Put your situation to our product law partner in the Netherlands, or contact Martin Krüger.