Importing from China to the EU: When Customs Holds Goods

Share this article

WhatsAppLinkedIn

Published on · Last updated

Importing from China to the EU becomes a legal matter on the day customs holds your shipment and asks for product documents. The basis is Regulation (EU) 2019/1020: customs and the NVWA check products against the Union law that applies to them. This page explains what customs can do and what you should be able to show.

In short

  • Customs suspends release if documents, marking or operator details are missing or doubtful; release is no proof of conformity (Articles 26 and 27, Regulation (EU) 2019/1020).
  • Under Regulation (EU) 2019/1020, a manufacturer in China is not an importer or an authorised representative: both are by definition established in the Union (Article 3(9) and (12)).
  • As a rule, a suspension decision under the Warenwet is open to objection within six weeks; have a Dutch product law lawyer secure that period and review your reply.

This article is part of our overview of product compliance in the Netherlands and of EU product law. For the route to market, see selling products in the EU.

Who can hold goods from China at the EU border?

Customs, or another designated authority, checks products entering the EU market on the basis of risk analysis (Article 25(1) and (3) of Regulation (EU) 2019/1020). Articles 25 to 28 apply to products covered by Union law in so far as no specific provisions on controls apply (Article 2(2)).

In the Netherlands, according to the 2023 explanatory note to the Dutch implementing decree, customs works with the NVWA (Nederlandse Voedsel- en Warenautoriteit). The NVWA supervises product groups such as toys, electrical equipment, gas appliances and textiles, and chooses on risk profiles which consignments to inspect: visually (CE marking), for technical documentation or by sampling. Release or suspension follows the findings.

On what grounds can customs suspend release for free circulation?

Customs suspends release for free circulation if one of the five grounds of Article 26(1) applies, such as missing documentation or a CE marking affixed in a false or misleading manner. Release is no proof that the product complies (Article 27).

Ground (Article 26(1))What it covers
(a)Required documentation is missing, or its authenticity, accuracy or completeness is in reasonable doubt
(b)Marking or labelling is not as the applicable law requires
(c)A CE or other required marking is affixed falsely or misleadingly
(d)The name and contact details of the economic operator are missing (Article 4(4))
(e)Any other cause to believe the product does not comply or presents a serious risk

Customs suspends; the market surveillance authorities decide what follows. They can ask customs to suspend (Article 26(3)), and if they have not asked within four working days to maintain the suspension, the product is released once all other formalities are fulfilled (Article 27(a)). That period binds the authorities, not you. For you the deadline is the one customs sets: anyone involved in a customs control must supply documents on request within any time-limit specified (Article 15(1) of the Union Customs Code, UCC).

Who is the importer, and where does a manufacturer in China fit?

A manufacturer in China is not an importer under Regulation (EU) 2019/1020. An importer is established in the Union (Article 3(9)), and so is an authorised representative (Article 3(12)).

For products under the legislation listed in Article 4(5), an economic operator established in the Union must carry out the tasks of Article 4(3): if the manufacturer is outside the Union, the importer or an authorised representative, as a last resort a fulfilment service provider (Article 4(1) and (2)). Not every product falls under that list, so a product from China does not necessarily need a CE marking and an EU representative. See our article on the EU authorised representative.

The declarant is the person who lodges the customs declaration in its own name or in whose name it is lodged (Article 5(15) UCC). In principle the declarant must be established in the Union (Article 170(2) UCC, with exceptions in paragraph 3), and answers for the declaration and its supporting documents (Article 15(2) UCC). Who acts as importer and declarant, and who bears the cost of a held shipment, is a contract question that we assess per file.

Important: Customs asks who the responsible operator in the Union is, and your importer asks you for a declaration of conformity. What you state about your role ends up in the file; for products under Article 4(5), the tasks of Article 4(3) of Regulation (EU) 2019/1020 lie with the operator established in the Union. Have a Dutch product law lawyer review your role and the contract before you sign.

Which documents must you be able to show?

That depends on the law for your product; the regulation lists none itself (Article 26(1)(a)). For products under Article 4(5), the operator in the Union verifies that the EU declaration of conformity and the technical documentation have been drawn up, where the applicable law provides for them, and supplies documentation on a reasoned request (Article 4(3)(a) and (b)).

That operator keeps the declaration available for the period the sector law prescribes, supplies documentation in a language the authority easily understands, and shows its name and contact details on the product or a document (Article 4(3) and (4)). Under the Low Voltage Directive the importer keeps the declaration for ten years (Article 8(8) of Directive 2014/35/EU). A declaration accompanies a shipment where the applicable law prescribes one; see our article on the EU declaration of conformity.

Consumer products under the General Product Safety Regulation have their own importer duties and need a responsible economic operator in the Union (Articles 11 and 16 of Regulation (EU) 2023/988; see our GPSR article). For electrical equipment, Dutch rules require manufacturers to provide the information and documents that demonstrate conformity, and the EU declaration of conformity, in Dutch or English, and importers the information and documents that demonstrate conformity (Articles 3(4), 3(5) and 5(4) of the Warenwetbesluit elektrisch materiaal); contact details and safety instructions must be in Dutch.

What do you do when customs or the NVWA ask for documents?

Establish who holds the shipment, on what basis and with which time limit. The time limit that counts is the one customs sets in its request (Article 15(1) UCC); the possible grounds are in Article 26(1) of Regulation (EU) 2019/1020.

The first step is factual, not legal: who holds the goods (customs or the NVWA), what the hold is based on, who lodged the declaration and which documents are available. Then collect what an authority can ask for: the invoice, transport documents, test reports, the declaration of conformity and the technical documentation, as far as the law for your product has them. Name one contact person towards the authority, and do not dispose of the goods in haste.

Can customs destroy the goods or refuse release?

An authority designated under Article 25(1) may destroy or render inoperable a product that presents a risk to the health and safety of end users, where it considers this necessary and proportionate (Article 28(4) of Regulation (EU) 2019/1020). Customs can also require destruction of goods on reasonable grounds (Article 197 UCC).

If the market surveillance authority concludes that a product presents a serious risk or does not comply, release is refused (Article 28(1) and (2)).

Storage costs money, but destruction cannot be undone, so first establish what the suspension rests on (a document, a label, a test result) and then choose. A document or label can be put right. In the face-mask case below, the Minister lifted the suspension on objection after the company submitted its own test reports, giving it the benefit of the doubt in that case (ECLI:NL:CBB:2025:401, para. 7.1).

How do you object to a suspension in the Netherlands?

A suspension decision under the Warenwet (the Dutch Commodities Act) is open to objection (bezwaar) within six weeks (Articles 7:1 and 6:7 of the General Administrative Law Act, Awb), then to appeal (beroep) at the Rotterdam District Court and further appeal at the Trade and Industry Appeals Tribunal (CBb).

Customs decisions of the kind in Article 8:2(2) of the General Customs Act follow another route, via the Noord-Holland District Court and a court of appeal (Annex 2 to the Awb, Articles 8(4) and 12); which route applies to a suspension by customs itself, we establish per case. Appeal does not suspend a customs decision, subject to Article 45(2) UCC; interim relief can be requested from the interim relief judge (Article 8:81 Awb).

On 18 July 2024 the Rotterdam District Court left in place the suspension of a shipment of children’s floor playpens: the importer did not dispute the test results and the court found the suspension not disproportionate (ECLI:NL:RBROT:2024:6616).

In a case about face masks from China, the CBb held on 29 July 2025, in a decision reopening the investigation in a damages case, that a suspension of 25 March 2021, taken under Article 27 of Regulation (EC) No 765/2008 as then in force, was unlawful because the NVWA’s investigation was not carried out with due care and the decision was not properly reasoned (ECLI:NL:CBB:2025:401; damages awarded on 16 December 2025: ECLI:NL:CBB:2025:671). Each case turns on its own file.

First read what the ground is and who took the decision. Respond with the documents that exist and say what is still being investigated, for example a test by an independent lab. If there is a decision, file an objection within six weeks and assess whether interim relief is needed. Look also at the quality of the investigation behind the measure.

Important: After the hold, a suspension decision of the Minister under the Warenwet (taken through the NVWA) can arrive. The six-week objection period (Articles 7:1 and 6:7 Awb) starts the day after the decision is made known (Article 6:8(1)), and your reply becomes part of the file. Have a Dutch product law lawyer secure the objection period and review your reply before you answer on the merits.

Is a shipment held in the Netherlands, and has a decision or a request for documents arrived? Put it to our product law partner in the Netherlands with the documents you already have.

What can you arrange yourself, and where do you need an adviser?

Documents from the manufacturer, a test report or a corrected label are technical work for your quality team, a test lab and a customs agent. A lawyer comes in when a decision or money is at stake.

You need a lawyer once release is suspended or refused, there is a decision to object to, the goods are about to be destroyed, or you want to recover cost and damage from your supplier or customer. A six-week objection period runs against a decision, and securing it comes first. Do not wait until the goods have stood for weeks.

When do you need a Dutch lawyer for a held shipment?

When the question is who the responsible operator is, what you state to an authority, or who answers to whom under the contract. Those moments decide what you state to the authority, under Article 4(3) for the operator in the Union, and how Articles 26 to 28 of Regulation (EU) 2019/1020 are applied to your shipment, so have a Dutch product law lawyer review them.

Your situationWhat is at stakeWhat we do in the first days
Customs or the NVWA holds your shipment and asks for CE documentsRelease or refusal (Articles 26 to 28 of the Regulation); the declarant answers for the declaration and its documents (Article 15(2) UCC), the operator in the Union for the tasks of Article 4(3)Assess file and time limits, establish the responsible operator
A decision under the Warenwet arrivesObjection within six weeks, then appeal (Articles 6:7 and 7:1 Awb)Prepare the objection, assess interim relief
Your buyer asks for an indemnityContractual liabilityReview terms with buyer and supplier

What changes from 21 September 2027?

Regulation (EU) 2026/2108 repeals the current Union Customs Code, Regulation (EU) No 952/2013 (Article 284(1)), and applies from 21 September 2027, with some provisions applying earlier (Article 287(2) and (3)). The references to the Union Customs Code on this page are to Regulation (EU) No 952/2013. Under the new code, the data provided for release for free circulation must include the identity of the responsible economic operator in the Union (Article 109(3)(a)).

How do we work on held shipments?

We advise and represent exporters outside the EU and their importers and buyers in the EU: role analysis, contracts under Dutch law, contact with customs and the NVWA, and objection and appeal at first instance and on appeal. For goods held for a brand owner, see counterfeit goods and customs.

Frequently asked questions about importing from China to the EU

Can customs hold a shipment from China because the CE documents are missing?

Yes, if the applicable Union law requires documentation that is missing, or there is reasonable doubt about it, or the CE marking is affixed in a false or misleading manner (Article 26(1)(a) and (c) of Regulation (EU) 2019/1020). Which documents are required depends on the law for your product; not every product needs a CE marking.

How long does customs hold a shipment from China?

The regulation sets no period for you. It names one period, four working days after the suspension, and that period binds the authorities: after that the product is released if the market surveillance authorities have not asked to maintain the suspension and all other formalities are fulfilled (Article 27(a)).

Who is the importer if I export from China to the EU?

Not if you are established outside the Union. An importer is established in the Union (Article 3(9) of Regulation (EU) 2019/1020), and so is an authorised representative (Article 3(12)). For products under Article 4(5), an operator established in the Union carries the tasks of Article 4(3): the importer, an authorised representative or, failing both, a fulfilment service provider.

Who checks goods from China in the Netherlands, and where do you object?

Customs checks in cooperation with the NVWA, which supervises product groups such as toys and electrical equipment (per the 2023 explanatory note). A suspension decision under the Warenwet is open to objection within six weeks (Articles 7:1 and 6:7 Awb), then appeal at the Rotterdam District Court and further appeal at the CBb. Some customs decisions follow another route.

When should an exporter or EU buyer call a Dutch lawyer about a held shipment?

When customs or the NVWA asks who the responsible operator is or for documents you must answer, when a decision arrives with a time limit, or when your buyer asks for an indemnity. Have a Dutch product law lawyer review the roles, the contract and your response before you answer.

Primary sources

Do you export to the EU, or buy from China, and is a shipment held in the Netherlands? Put your situation to Martin Krüger, our product law partner in the Netherlands, ideally with the customs notice and the documents you already hold.

News & Insights
Which topics would you like to receive updates on?
Who are you?
Which industry or sector do you operate in? (Optional)