Published on
Food contact materials in the EU fall under Regulation (EC) No 1935/2004 and, for plastic, Regulation (EU) No 10/2011. If your EU customer asks for a declaration of compliance before the first order, these are the rules behind it. MAAK Advocaten N.V., a law firm in Amsterdam, explains who gives it, what it contains and when a Dutch product law lawyer should review it.
In short
- Food contact materials need a written declaration of compliance (Article 16(1) of Regulation (EC) No 1935/2004; for plastic Article 15 of Regulation (EU) No 10/2011).
- The business operator gives it; Regulations 1935/2004 and 10/2011 name no importer role or EU authorised representative, and the label may name a seller established in the EU.
- For plastic, the transition date of Regulation (EU) 2025/351 has passed; check per batch when stock was first placed on the market.
This article is part of our overview of sector-specific product rules in the EU and of product compliance in the Netherlands. It leaves out packaging waste, food recalls and PFAS.
What does your EU customer ask for with food contact materials?
A written declaration of compliance. Article 16(1) of Regulation (EC) No 1935/2004 requires the specific measures to provide for it; for plastic, Article 15 and Annex IV of Regulation (EU) No 10/2011 set out its content.
Customers often call it a conformity declaration. The regulations discussed here provide for a declaration of compliance and do not mention a CE declaration of conformity; for that CE document, see our article on the EU declaration of conformity.
The declaration does not accompany the goods at every stage. Article 15(1) of Regulation (EU) No 10/2011 requires it at the marketing stages other than the retail stage: business to business, not on sales to the consumer. For the consumer, labelling applies (Article 15 of Regulation (EC) No 1935/2004) and, for certain plastic articles, instructions for use (Article 14a of Regulation (EU) No 10/2011).
Companies reach me at MAAK Advocaten with this question: “Our customer asks for a declaration of compliance and migration tests, and we are not sure what to send.” My first step is not the lab but finding out what you supply and to whom: a pack, a kitchen article or an intermediate product, and which part is plastic. Then we check what the law asks for your step in the chain and what you already have. Usually a large part exists already; it is just not in one place. We pull it together, so that you return to your customer with one complete set.
What counts as a food contact material, and when may plastic be sold?
Materials and articles that are meant to touch food, already do, or can reasonably be expected to (Article 1(2) of Regulation (EC) No 1935/2004). Plastic may be sold only if it meets Article 4 of Regulation (EU) No 10/2011, which includes the declaration.
For plastic, Article 4 of Regulation (EU) No 10/2011 requires compliance with Articles 3, 15 and 17 of the framework regulation, good manufacturing practice under Regulation (EC) No 2023/2006, the composition and declaration rules of chapters II to IV and, for recycled plastic, Regulation (EU) 2022/1616. So the declaration is one of the conditions for putting plastic on the market.
What must the declaration of compliance contain?
Annex IV to Regulation (EU) No 10/2011 lists the content: who issues it, who produces or imports, what is declared, the date, and information on restricted substances and conditions of use. The operator renews it on substantial changes (Article 15(3)).
Point 6 was replaced and points 10 and 11 (reprocessed plastic and substances made from waste) were added by Regulation (EU) 2025/351, which entered into force on 16 March 2025.
Next to the declaration, the operator keeps appropriate documentation available for the competent authorities on request: test conditions and results, calculations, other analyses and the reasoning behind compliance (Article 16(1) and (2) of Regulation (EU) No 10/2011). The regulation sets no template and no time limit for handing the declaration to your customer; agree one in the contract.
Regulation (EU) 2024/3190 also requires a written declaration of compliance for the materials and articles it covers, with a list of any bisphenols used in their manufacture (Article 8, Annex III). The declaration for a finished plastic article must cover both subjects; the text does not say whether in one document or in two.
If you want to know which declaration your step in the chain requires, put your situation to us through our product law partner in the Netherlands.
Who in the chain gives the declaration, and do you need an EU party?
The business operator, not a role such as importer. Under Article 15(2) of Regulation (EU) No 10/2011 the operator provides the declaration, and Annex IV, point 2, names the operator who manufactures or imports; Article 2(2)(d) of Regulation (EC) No 1935/2004 defines the operator.
“Placing on the market” has its own definition here: holding for the purpose of sale, including offering for sale or any other form of transfer, whether free of charge or not, and the sale, distribution and other forms of transfer themselves (Article 2(1)(b)). Regulation (EC) No 1935/2004 and Regulation (EU) No 10/2011 contain no separate importer duties and no EU authorised representative; for that role elsewhere, see our article on the EU authorised representative.
The label names the manufacturer, the processor or a seller established in the Union who is responsible for placing on the market; naming such a seller is an option (Article 15(1)(c) of Regulation (EC) No 1935/2004). In the Dutch and German versions “established in the Union” attaches to the seller; the English wording is less clear, so have it checked before you rely on it.
Before the first shipment, agree who in the chain gives which declaration, have the declaration name who produces or imports, and record what you declare. A Dutch customer is usually the one who asks you for it, because he is answerable himself.
Between you and your supplier I agree that he gives you the information you need for your declaration, that he reports changes at once (the declaration must then be renewed, Article 15(3)) and who bears the cost of a rejected batch. A warranty that the product “complies with all food contact rules” is quickly signed and falls short in a dispute; a working agreement with a warranty limited to what the supplier can know gives you what you need for your own declaration.
What do you do when the NVWA asks for the declaration or evidence?
The NVWA (Nederlandse Voedsel- en Warenautoriteit) supervises compliance (Article 25(1) of the Warenwet, the Commodities Act). The operator must make appropriate documentation available on request (Article 16(1) of Regulation (EU) No 10/2011). Read what is asked, gather what exists, answer with a plan.
The NVWA’s specific intervention policy for food contact materials changes on 1 December 2026, when version 03 replaces version 02 of 12 July 2025 (Staatscourant 2026, 39099). It ranks a shortcoming by its possible effect on health and usually meets violations with an administrative fine.
Breach of Article 3, Article 17 and certain paragraphs of Article 15 of Regulation (EC) No 1935/2004, or of the rules adopted under its Article 5(1), is, among others, a prohibited act under Article 2(3) of the Warenwetbesluit verpakkingen en gebruiksartikelen. The Minister can impose an order subject to administrative coercion (Article 32 Warenwet), an order subject to a penalty (Article 5:32 of the General Administrative Law Act) or an administrative fine (Article 32a Warenwet). See also our article on enforcement by the NVWA.
For the Dutch market, the instructions for use (where special conditions must be observed) and the indications of Article 15 of Regulation (EC) No 1935/2004 are to be in Dutch (Article 5 of the Warenwetbesluit; Article 15(4) and (5) of that Regulation).
First I read calmly what exactly is asked, by whom, and about which product and batch. Then I gather the documents: the declaration of compliance, your suppliers’ specifications, the migration tests or calculations, the documentation of your production process and the deliveries to your customers. If a measure follows, we prepare the written views (zienswijze) together.
What do you do with stock now that the first transition dates have passed?
Check per batch when it was first placed on the market. For plastic, the cut-off date in Regulation (EU) 2025/351 has passed (16 September 2026, Article 4), and so has the first bisphenol A deadline of Regulation (EU) 2024/3190 (20 July 2026, Articles 11 and 12).
Plastic that complied with Regulation (EU) No 10/2011 as it read before the amendment and was first placed on the market before 16 September 2026 may be traded until stocks are exhausted (Article 4(1) of Regulation (EU) 2025/351). Intermediate products and substances that complied with the old text, were first placed on the market after 16 December 2025 and do not meet the new text must carry a declaration saying so and saying that they may only be used for plastic placed on the market before 16 September 2026 (Article 4(2)). New batches must meet the amended text.
Regulation (EU) 2024/3190 prohibits using bisphenol A in the materials it covers and placing materials made with it on the Union market (Article 3(1)), with exceptions in Annex II. It covers only the material groups of Article 1(2): adhesives, rubbers, ion-exchange resins, plastics, printing inks, silicones, varnishes and coatings. Some deadlines still run. Single-use articles may be first placed on the market until 20 January 2028 if they preserve fruit or vegetables (other than the products of Annex I to Directive 2001/112/EC) or fishery products, or have a bisphenol A varnish or coating only on the outer metal surface (Article 11(2)). Filling and sealing such articles may continue for 12 months after the applicable period, and the packaged food may be sold until stocks are exhausted (Article 11(3)). Repeat-use articles first placed on the market until 20 July 2026, or until 20 January 2028 for professional food production equipment, may remain on the market until 20 July 2027 and 20 January 2029 respectively (Article 12).
My first step is to establish which batches were first placed on the market when: that is in your records. Then you decide per batch whether to keep, sell or take back. I prefer to establish per batch what was first traded before the date and deal only with the rest, rather than take every doubtful case off the market at once: you avoid writing off sound stock, and you have a file if the authority asks.
When do you need a Dutch lawyer for food contact materials?
When the question is what you declare, who gives it and who bears the risk, or what you show an authority. Those points turn on Article 15 of Regulation (EU) No 10/2011 and Article 16 of Regulation (EC) No 1935/2004.
| Your situation | What is at stake | What we do in the first days |
|---|---|---|
| Your EU customer demands a declaration before the first order | The declaration is a condition for placing plastic on the market (Article 4 of Regulation (EU) No 10/2011) | Establish what you supply and to whom, which declaration your step requires and what you already have |
| Your customer asks who the responsible EU party is | The operator places on the market, also when importing (Article 2 of Regulation (EC) No 1935/2004); the label may name an EU seller | Review the supply contract, propose roles and information duties |
| Your customer asks for an indemnity on the declaration | Contractual liability for what you confirm (Annex IV, point 5) | Review indemnity and supply terms |
| The NVWA or your customer asks for evidence | Documentation on request (Article 16(1)); measures under the Warenwet | Assess the request, organise the documents, contact the authority |
| Stock around the transition dates | Dates in Regulation (EU) 2025/351 and Regulation (EU) 2024/3190 | Review records, decide per batch |
How does MAAK Advocaten work on food contact materials?
We act for manufacturers outside the EU and their Dutch and EU customers on the declaration under Article 15 of Regulation (EU) No 10/2011: role analysis, supply and indemnity terms under Dutch law, contact with the NVWA and, where a measure follows, objection and appeal.
Frequently asked questions about food contact materials in the EU
What is a declaration of compliance for food contact materials?
A written declaration that the material or article meets the rules that apply to it. Article 16(1) of Regulation (EC) No 1935/2004 requires it through the specific measures; for plastic, Article 15 and Annex IV of Regulation (EU) No 10/2011 set out who issues it and what it contains.
Do I need an EU authorised representative to sell food contact materials in the EU?
Regulation (EC) No 1935/2004 and Regulation (EU) No 10/2011 name no authorised representative. The declaration is provided by the business operator, and Annex IV, point 2, names the operator who manufactures or imports. The label may name a seller established in the Union who is responsible for placing on the market (Article 15(1)(c) of Regulation (EC) No 1935/2004).
How often must the declaration be renewed?
The regulation sets no fixed period. The declaration is renewed on substantial changes in composition or production that change the migration, or when new scientific data become available (Article 15(3) of Regulation (EU) No 10/2011).
Who supervises food contact materials in the Netherlands?
The NVWA supervises compliance (Article 25(1) of the Warenwet). Breach of Articles 3 and 17 and certain paragraphs of Article 15 of Regulation (EC) No 1935/2004, or of the rules adopted under its Article 5(1), is, among others, prohibited (Article 2(3) of the Warenwetbesluit). The Minister can impose an order subject to administrative coercion or a penalty, or an administrative fine.
When do you need a Dutch lawyer for food contact materials?
When the question is what you declare, who bears the risk or what you show an authority: your customer wants a warranty or indemnity on the declaration, your supplier gives none, or the NVWA asks for evidence (Article 16 of Regulation (EU) No 10/2011). Have a Dutch product law lawyer review the documents and the contract.
Primary sources
- Regulation (EC) No 1935/2004 (framework regulation), consolidated version of 27 March 2021 (non-binding consolidation): Articles 1, 2, 3, 15, 16, 17 and 25
- Regulation (EU) No 10/2011 (plastic materials and articles), consolidated version of 14 July 2026 (non-binding consolidation): Articles 4, 14a, 15, 16 and Annex IV
- Regulation (EC) No 2023/2006 (good manufacturing practice), consolidated version of 16 March 2025 (non-binding consolidation)
- Regulation (EU) 2025/351 (amendment of Regulation (EU) No 10/2011), Article 4
- Regulation (EU) 2024/3190 (bisphenol A and other bisphenols), consolidated version of 23 February 2026 (non-binding consolidation): Articles 1, 3, 8, 11 and 12 and Annexes II and III
- Regulation (EU) 2022/1616 (recycled plastic), consolidated version of 3 December 2025 (non-binding consolidation)
- Warenwet (Commodities Act), Articles 25, 32 and 32a
- Warenwetbesluit verpakkingen en gebruiksartikelen, Articles 2 and 5
- Algemene wet bestuursrecht (General Administrative Law Act), Article 5:32
- NVWA, Specific intervention policy for food contact materials IB03-SPEC 61, version 03 (Staatscourant 2026, 39099), in force from 1 December 2026
Does your EU customer ask for a declaration of compliance and migration tests? Put your situation to me through the page of our product law partner in the Netherlands, ideally with your customer’s request and the documents you already hold. — Martin Krüger